NOTE: I prefer payments to be made securely and safely through PayPal as this gives both buyer and seller protection. Click the 'Add to Cart' button beneath the item you want to purchase and it will be added to your PayPal shopping basket/cart. Your shopping basket/cart will appear in a new tab where you can remove items, change quantities and make a payment. If you would prefer to pay by cheque, then please send a list of the items you require via the Contact page and you will be invoiced
The RCT-Tx10 The most basic, entry-level RCT transmitter for those who don't want or need bells and whistles (though actually you can use the bind button to sound a whistle or bell if required)
Speed / direction control knob
Bind button (also used for accessories - Ch5)
Illuminated on/off switch (also used as feedback monitor)
The RCT-Tx20 A compact, handheld transmitter with up to five outputs for controlling accessories and a knob for controlling speed and direction
Speed / direction control knob
Bind button (also used for accessories - Ch5 (F5))
Illuminated on/off switch (also used as feedback monitor)
Direction switch for use with receivers which are programmed for low-off. When used with receivers operating in 'centre-off mode, the switch is used to control accessories (Ch3 low (F3)/high (F4))
Two function buttons; F1 (Ch2), F2 (Ch4)
The transmitter can also be used for re-programming RCT and /or Deltang receivers
The RCT-Tx24 A transmitter capable of independently controlling up to twelve locomotives (live steam and/or battery powered)
Speed/Regulator control knob (controls regulator servo or controls speed and direction if the receiver in a battery loco is set-up for 'centre off') (Channel 1)
Direction/Reverser control knob (controls the reverser servo or the direction for receivers in battery locos set-up for 'low-off' (Ch3))
Inertia/auxiliary control knob (controls inertia (ie the rate at which speed knob changes are implemented or can be used to control another servo (eg gas on live steam locos) (Ch4))
12 position Loco Selecta switch (the twelve locos can be live steam or battery powered (in any combination))
Bind button (also used for accessories such as whistle - Ch5)
Illuminated on/off switch (also used as feedback monitor)